Metrology.NET®

TestProcess.Source.Length.Form.Straightness.Surrface

Description – The minimum normal (perpendicular) distance between two parallel planes that fully contain a surface along a specified line.

Required Parameters

  • Length – Total line length

Optional Parameters

  • StartPointX – Start Point on the X-Axis distance from the reference
  • EndPointX – End Point on the X-Axis distance from the reference
  • StartPointY – Start Point on the Y-Axis distance from the reference
  • EndPointY – End Point on the Y-Axis distance from the reference
  • NumberOfPoints –
  • Reference – DIN, ISO, ASTM, ASME, or Federal G-Series Measurement Specifications  [plain text]

Measured Value & Uncertainty

  • Straightness(m)

Leave a Reply