Description – Length is the straight-line distance between two points. It can be measured in one, two, or three dimensions with 6 degrees of freedom.
Length measurements are made from Point 1 to Point 2 based on the reference definition of an ISO or ASME standard datum specifically defining the orientation and references for each of the x,y,z points. The start and end points allow defining and distinguishing direction if required; otherwise, they are interchangeable.
Required Parameters
- Length
Optional Parameters
- StartPointX – Start Point on the X-Axis distance from the reference
- EndPointX – End Point on the X-Axis distance from the reference
- StartPointY – Start Point on the Y-Axis distance from the reference
- EndPointY – End Point on the Y-Axis distance from the reference
- StartPointZ – Start Point on the Z-Axis distance from the reference
- EndPointZ – End Point on the Z-Axis distance from the reference
- Reference – ISO- or ASME-compliant datum drawing specification (or equivalent unambiguous specification) [plain text]
Measured Value & Uncertainty
- Length (m)